You can Download Ready made project here (https , http , Fts):
https://raw.githubusercontent.com/AlbatrossC/sppu-codes/main/answers/cnl/11_https_http_fts.pkt
Network Setup and Service Configuration (Cisco Packet Tracer)
1️⃣ Create the Network Topology
----------------------------------
1. Open Cisco Packet Tracer.
2. From the device menu:
- Add 3 PCs (User1, User2, User3)
- Add 1 Switch (2950-24)
- Add 1 Server (Server)
3. Connect all using Copper Straight-Through Cables:
- PCs (Fa0) → Switch (Fa0/1, Fa0/2, Fa0/3)
- Server (Fa0) → Switch (Fa0/4)
2️⃣ Assign IP Addresses
-----------------------
Device | Interface | IP Address | Subnet Mask
---------------------------------------------
User1 | Fa0 | 190.100.10.10 | 255.255.255.0
User2 | Fa0 | 190.100.10.20 | 255.255.255.0
User3 | Fa0 | 190.100.10.30 | 255.255.255.0
Server | Fa0 | 190.100.10.40 | 255.255.255.0
3️⃣ Configure Server Services
-----------------------------
1. Click on Server → Services tab.
2. Enable the following:
- HTTP: ON
- HTTPS: ON
- FTP: ON
3. Under FTP:
- Add User → Username: test | Password: test | Read/Write Access
4️⃣ Modify the Webpage (index.html)
----------------------------------
1. Go to Services → HTTP → HTML.
2. Select index.html.
3. Replace contents with:
Welcome to My Web Server!
This is a test for HTTP, HTTPS, and FTP protocols.
4. Click Save.
5️⃣ Verify HTTP and HTTPS from PC
---------------------------------
1. Click User1 PC → Desktop → Web Browser.
2. Test using:
http://190.100.10.40
3. Then test HTTPS:
https://190.100.10.40
6️⃣ Test FTP Access
-------------------
1. Click User2 PC → Desktop → Command Prompt.
2. Type:
ftp 190.100.10.40
3. Enter credentials:
Username: ftpuser
Password: 1234
4. Commands:
dir → List files
get index.html → Download file
bye → Exit FTP
✅ Final Verification
---------------------
- HTTP works → http://190.100.10.40
- HTTPS works → https://190.100.10.40
- FTP works → ftp 190.100.10.40 (with username & password)